This NEMA-14 motor generates 1,4 kg-cm of holding torque at 1Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.
This motor is particulary suited for precision applications due to its 1.8° step angle.
When connected to a 1067 - PhidgetStepper Bipolar HC, the 3324 has a maximum speed of 2344 RPM.
Motor Controller and Connection
The 3324 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.
The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.
Note: Make sure to unplug the power cord from the motor controller before switching wires around.
The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.
The mounting holes on this motor are compatible with the 3338 - Mounting Bracket (NEMA17).
- Motor Type: Bipolar Stepper
- Step Angle: 1.8°
- Step Accuracy: 5 %
- Holding Torque: 1,36 kg·cm
- Rated Torque: 1,2 kg·cm
- Maximum Speed (w/1067 Motor Controller): 2344 RPM
- Acceleration at Max Speed (w/1067 Motor Controller): 1E+06 1/16 steps/sec²
- Recommended Voltage: 12 V DC
- Rated Current: 1 A
- Coil Resistance: 2.7 O
- Phase Inductance: 4.3 mH
- Shaft Diameter: 5mm
- Rear Shaft Diameter: 3.9 mm
- Mounting Plate Size: NEMA - 14
- Weight: 200 g
- Number of Leads: 4
- Wire Length: 300 mm